HP3G SERIES
Swash-plate Type axial Piston Variable Displacement Pump
HP3G series variable axial piston pump with swashplate design for hydro-static drives in closed circuit, high pressure, high speed , high reliability, low noise, can be applied in engineering machinery and mobile machinery.
Features
·Variable axial piston pump of swashplate design for hydrostatic drives in closed circuit.
·The flow is proportional to the drive speed and displacement. The flow increases as the angle of the swashplate is adjusted from zero to its maximum value.
·Flow direction changes smoothly when the swashplate is moved through the neutral position.
·Two pressure-relief valves are provided on the high pressure ports to protect the hydrostatic transmission (pump and motor) from overload.
·The integrated charge pump can provide system replenishing and cooling fluid flow.
·High reliability, long working lifetime
·Compact structure, high power density.
Technical data
| Size | 46 |
| Displacement cc/rev | 45.9 |
| Speed | Rated (rpm) | 4000 |
| Max. (rpm) | 4100 |
| Min. (rpm) | 500 |
| Pressure | Rated (bar) | 345 |
| Max. (bar) | 385 |
| Minimum low loop pressure(bar) | 10 |
| Charge pressure | Min. (bar) | 6 |
| Max. (bar) | 31 |
| Control Pressure | Min. (bar)(EDC control)(bar) | 21.5 |
| Charge pump | Rated (bar) | 1.7 |
| Max. (bar) | 5.2 |
| Casting pressure ( Absolute pressure ) | Rated (bar) | 0.8 |
| Max. (bar) | 6 |
| Oil viscosity mm2/s | 10~1000,Best range: 16~36 |
| Oil Temperature ℃ | -20~95 |
| Oil Cleanliness | ISO 4406 Class 18/13 or higher |
| Weight ( w/o auxiliary flange ) Kg | 33 |
Type introduction
| HP3G | 46 | A | R | A2 | N | F | S2 | B1 | K28 | K28 | B | P | J | PN | |
| 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 | 11 | 12 | 13 | 14 | 15 | 16 |
Product series
| 1 | Variable piston pump of swashplate in closed circuit | HP3G |
Displacement
Product version
Rotation
| 4 | Right hand (clockwise) | R |
| Left hand (counter clockwise) | L |
Control
| 5 | High Current Electric Displacement Control (HC EDC), oil filled,Deutsch DT04-2P, Voltage 12V DC | A2 |
Displacement Limiters
| 6 | Without Displacement Limiters, 46cc/rev | N |
| With mechanical stroke limiter, externally adjustable | M |
Mounting flange
| 7 | ISO 3019-1, SAE B-2 hole (101-2) | F |
Input shaft
| 8 | SAE J744-22-4 13T 16/32DP | S1 |
| SAE J744-25-4 15T 16/32DP | S2 |
Through drive option
| 9 | No through drive | NN |
| SAE A 82-2 SAE J744-16-4 9T 16/32DP | A1 |
| SAE A 82-2 SAE J744-19-4 11T 16/32DP | A2 |
| SAE B 101-2 SAE J744-22-4 13T 16/32DP | B1 |
| SAE B 101-2 SAE J744-25-4 15T 16/32DP | B2 |
Setting pressure of the relief valve
10-Overpressure Protection Type and Setting Side "A"
11-Overpressure Protection Type and Setting Side "B"
| 10 11 | High pressure relief valve setting | High pressure relief valve setting |
| 140 bar | K14 |
| 175 bar | K17 |
| 190 bar | K19 |
| 210 bar | K21 |
| 230 bar | K23 |
| 250 bar | K25 |
| 280 bar | K28 |
| 320 bar | K32 |
| 350 bar | K35 |
Please contact us for configurations or pressures not shown in above form.
Charge pump
| 12 | With charge pump,13.9 cc/rev | B |
| Without charge pump, need external charge | N |
Filtration Options
| 13 | Suction, with charge pump | L |
| Remote pressure, with charge pump | P |
Charge pressure
| 14 | 19.5 bar | B |
| 21.5 bar | J |
| 25 bar | S |
Control orifice
| 15 | Control orifice of Servo A&B φ0.9mm | PN |
| Control orifice of Servo A&B φ1.4mm | SN |
| Without control orifice | NN |
Paint and Nameplate
| 16 | Black paint and Hengli nameplate | Blank |
Pump principle
| Input shaft rotation | CW | CCW |
| Energized coil | C2 | C1 | C2 | C1 |
| Oil port A | In | Out | Out | In |
| Oil port B | Out | In | In | Out |
| Servo pressure acting oil port | M5 | M4 | M5 | M4 |
Connector:
Deutsch DT04-2P
Voltage:12V
V View
Refer to pump installation drawing for port locations.
Installation size
HP3G46 installation size
Port details
| | Port Name | Port Size and Description | Tightening Torque(N.m) |
| S | Charge Pressure Inlet | SAE J1926/1 ( 1 5/16"-12UN-2B ) | 134 |
| A, B | Working Port | SAE J1926/1 ( 1 5/16"-12UN-2B ) | 134 |
| L1, L2 | Case Drain Port | SAE J1926/1 ( 1 1/16"-12UN-2B ) | 101 |
| M1, M2 | Port "A" and "B" Gage Port | SAE J1926/1 ( 9/16"-18UNF-2B ) | 25 |
| M3 | Gauge Port Of Charge Pump | SAE J1926/1(9/16"-18UNF-2B) | 25 |
| M4, M5 | Servo Gage Port | SAE J1926/1 ( 9/16"-18UNF-2B ) | 25 |
| D | Charge filtration port D (To remote filter ISO 11926-1 7/8-14 Charge filtration port D Charge gauge port for remote filtration with charge pump option) | SAE J1926/1 ( 7/8"-14UNF-2B ) | 73 |
| E | Charge filtration port E (From remote filter Charge gauge port for remote filtration with or w/o charge pump option) | SAE J1926/1 ( 7/8"-14UNF-2B ) | 73 |
| F | Air Bleed Port | SAE J1926/1(7/16"-20UNF-2B) | 15 |
HP3G46 Mounting Flange
HP3G46 Input Shaft type
"S1" type spline shaft "S2" type spline shaft
Product Tags:
|
|
Axial Piston Variable Displacement Axial Piston Pump Swash Plate Type High Speed Images
|
